Autominer example

Start with a 200V power unit

From the 200V example build, we know how to make a 200V power unit.

For this example, you could hook up to an existing 200V line, or make a new power unit specially for the Autominer.

There are even better ways to get power to an autominer, but those are outside the scope of this example.

Transform up to 800V

We can use a transformer to transform 200V up to 800V.

keep an eye on where the green square and yellow square are in the world in our case yellow is on the 200V side, and green on the 800V side.

• Place 4 High Voltage Cables in the green side.
• Place 1 Medium Voltage Cable in the yellow side.
• Place a Ferromagnetic Core of any kind in the middle slot.

Now the transformer will transform at a ratio of 1:4 . (and 200*4=800)

Set up autominer

Breaker (Optional)

Finally