Remote Signal Receiver is used to receive wireless electrical signal transmitted by Signal Transmitter or Wireless Button.
To proper work you need to set specified channel which the Receiver will work on.
Signal Receiver has indicator light which determines connection status.
It has menu where you can set work mode. The receiver has three work modes - biggest value, smallest value or toggle.
When you use multiple wireless signal sources which have different signal values, the receiver set in this mode will receive only the biggest one.
In this example both Signal Transmitters are working on the same channel.
Receiver A is set in Biggest value mode and it's receiving 75% signal.
Receiver B is set in Smallest value mode and it's receiving 25% signal.
When you use multiple wireless signal sources which have different signal values, the receiver set in this mode will receive only the smallest one.
It works as shown in example above.
In this mode the receiver will react as a switch. To switch it's state you have to deliver only short pulse of signal from, for example, Wireless Button.
You can use this mode to control one Relay by multiple Wireless Buttons.